Modular Cleanroom Solutions

Modular cleanroom solutions deliver flexible, scalable, and rapidly deployable controlled environments to meet diverse industry cleanliness standards.

Cleanroom Sandwich Panels

Sandwich panels are prefabricated composite building elements widely used for cleanroom walls, ceilings, and partitions.

Cleanroom Door or Window

Cleanroom doors are designed to maintain strict contamination control, air tightness, and easy cleanability.

Cleanroom Air Showers

An air shower is a contamination control enclosure installed at the entrance of a cleanroom.

Cleanroom Pass Box

Pass box is a small, enclosed compartment installed in a cleanroom wall to transfer materials, tools, or samples between two areas of different cleanliness levels without compromising the controlled environment.

Cleanroom FFU

FFU (Fan Filter Unit) is a device that integrates a fan and HEPA filter, widely used in cleanroom ceiling mounted air supply systems

Cleanroom Other products

Cleanrooms involve multiple fields, and their engineering includes cleanroom equipment, modularization, cleanroom systems, enclosure systems, etc

Modular cleanroom

The pre-assembled controlled-environment unit reorganizes site-installed functional systems into standardized, high-load-bearing modular sections, combining multiple operational features into a single integrated solution for reliable, repeatable performance.

Prefabricated laboratory

These pre-assembled controlled-environment units consist of two integrated subsystems: a rigid structural framework and a fully equipped utility network. The framework comprises factory-made wall partitions and overhead grid supports, while the utility network integrates climate control and power

Modular Lab

modular lab building sprefabricated modular clean roomsprefab lab building smodular wall partition modular cleanroom cleanroom container Modular Clean room Modular Lab

Cleanroom concealed bar ceiling system

The hiding bar ceiling system, under the indoor ceiling, can’t see the T-bar ceiling, Only the ceiling can be seen in turn, the suspension depends on the connection between the hidden bar ceiling and the ceiling to achieve the weight-bearing effect.

Aluminum honeycomb cleanroom panel

Aluminum Honeycomb cleanroom panel is an advanced composite panel system specifically engineered for high-performance controlled environments.

Fiberglass panel

Clean Room Fiberglass Panel(GRP Panel) is a high-strength, chemically resistant composite panel made from a fiberglass-reinforced resin substrate. It is specifically designed for cleanrooms, sterile environments, and spaces with stringent hygiene and surface cleanliness requirements. Featuring a smo

Silica rock cleanroom panel

A Silica Rock Cleanroom Panel bonds two coated-steel facings to a rigid, inorganic silica rock (silicon crystal) core — an A-grade fireproof, moisture-proof and high-strength cleanroom wall and ceiling panel made to a ≤ 2 mm/2 m flatness tolerance.

Duct cleanroom panel

As one of the most responsive clean room panels manufacturers, we provide full BIM families, load-calculated structural reports, and on-site QA support—ensuring your clean room panel supplier becomes a true extension of your engineering team.

Clean room aluminium door

Clean room aluminum frame door is the most widely used sliding door in clean room, It has the characteristics of beautiful appearance, high strength, good flatness,strong air tightness, heat insulation, good heat preservation and easy cleaning.

Fireproof door

Fireproof door refers to a door that can meet the requirements of fire stability, integrity and heat insulation in a certain period of time.It is located in the fire partition room, evacuation stairwell, vertical shaft and other fire retardant divider with certain fire resistance...

Clean room emergency escape door

Clean room emergency escape doors are mounted to the outside of a building as emergency fire exit. The doors also provide an alternative if the route to the regular exit is blocked by fire. Emergency doors for clean rooms are outward opening door with a crash bar on it and with exit signs leading to

Clean room sliding door

Clean room sliding door systems provide exceptional performance, offering a wide range of innovative options to meet the needs of all environments. From hospital entrances to retail stores; smooth, quiet and reliable operation is delivered with modular configuration options. Flexibility in design en

Multi-Person Air Shower Room / Air Shower Tunnel

The Multi-Person Air Shower Room is a high-capacity contamination control solution designed for simultaneous use by 2 to 6 personnel or for cleaning small cargo passing into cleanrooms.

Single-Person Air Shower Room

Self-contained Air Shower/ Air tunnel systems by Terra remove surface-deposited particles from personnel garments and equipment before entering the clean room.

Cargo Air Shower Room / Goods Air Shower Tunnel

The Cargo Air Shower Room is a heavy-duty contamination control unit designed specifically for cleaning pallets, cartons, drums, equipment, and raw materials before they enter a cleanroom or controlled environment. It directs high-velocity HEPA-filtered air through adjustable nozzles to remove dust,

Dynamic Pass Box

Compared to a Static Pass Box, it has larger external dimensions for the same internal size and a higher manufacturing cost. Dynamic pass boxes are divided into two subtypes: Laminar Flow Pass Box, which provides vertical laminar airflow in a top-supply

Aluminum Pass Box

The Cleanroom Aluminum Pass Box is a material transfer device installed between clean and non-clean areas, or between zones of different cleanliness levels.

Static Pass Box

The Static Pass Box, also known as Static Transfer Window, is a material transfer device installed between clean and non-clean areas or between zones of different cleanliness levels.

VHP Pass Box

The VHP Pass Box (Vaporized Hydrogen Peroxide Sterile Pass Box) is a sealed transfer device designed for biological decontamination of material surfaces.

Fan Filter Unit(FFU)

FFU, short for Fan Filter Unit, is an air purification device that integrates a fan and a high-efficiency filter into a single unit. FFUs are typically installed in the ceiling grid of cleanrooms, serving as terminal air supply units that deliver high-efficiency filtered clean air into the cleanroom environment.

High Efficiency Air Outlet

The High Efficiency Air Outlet, also known as HEPA Air Outlet, is a terminal air supply device in cleanroom HVAC purification systems. Installed on the cleanroom ceiling, it houses a high-efficiency filter and delivers treated clean air uniformly into the cleanroom.

Hepa Supply Module(GSM)

GSM housing made of 1.2mm cold-rolled steel or 2.5mm aluminum profile with unified coating. Downstream area fully welded for leak-free years of use. Camfil Leak-Lead™ design prevents structural leakage. Built-in GSF filter with special jelly liquid tank seal ensures long-term sealing.

Hepa Supply Module

PHAP housing with built-in PHF filter tested per EN1822 with point-by-point scanning. Meets SAT with ≤0.01% PAO/DEHS penetration. Silicone jelly seal ensures long-term sealing for frequent disinfection. Camfil Leak-Lead™ design prevents structural leakage.

Negative Pressure Weighing Room

The negative pressure weighing chamber is a specialized local purification equipment used in pharmaceutical manufacturing, microbiological research, scientific experiments, and other similar settings. It provides a vertical unidirectional airflow, with some clean air circulating within the operating

Clean laminar flow hood

Purified laminar flow cover is an air purification unit that can provide a locally clean environment，It can be installed flexibly above the process points requiring high cleanliness.

Clean Panel Clean Booth / Hardwall Modular Clean Booth

The Clean Panel Clean Booth is a rigid, high-integrity contamination control enclosure constructed from industrial-grade cleanroom sandwich panels. Unlike softwall (PVC) or semi-rigid (acrylic) booths, this hardwall solution provides superior sealing, thermal insulation, and structural durability –

Anti-Static PVC Clean Booth / ESD PVC Strip Curtain Enclosure

The Anti-Static PVC Clean Booth is a flexible, cost-effective contamination control enclosure designed to create a local clean zone within general workshops or existing cleanrooms. Constructed with anti-static PVC strip curtains and a lightweight industrial frame, it provides excellent accessibility, static dissipation, and reliable particle protection for ESD-sensitive processes. This unit is ideal for applications requiring ISO Class 7–8 (Class 10,000–100,000) cleanliness with frequent personnel or material movement.

Modular Cleanrooms – Stability at the Core, Redefining the Clean Future.

Get a Free Quote Now

Cleanroom Latest News

Stay updated with industry insights and company announcements

Food and Beverage

Planning Fire Rated Cleanroom Doors for Food and Beverage with Cleanable Frames and Reliable Traffic Flow

Plan fire rated cleanroom doors with guidance on design interfaces, supplier scope, installation quality, performance checks, maintenance access, and lifecycle cost.

Precision Instruments and Optics

Planning Cleanroom Glass Wall for Precision Instruments and Optics with Reflection Control and Safe Pane Replacement

Plan cleanroom glass wall with guidance on design interfaces, supplier scope, installation quality, performance checks, maintenance access, and lifecycle cost.

Semiconductor and Electronics Manufacturing

Planning Clean Room Wall Systems for Semiconductor and Electronics Manufacturing with Repairable Bays and Coordinated Utilities

Plan clean room wall systems with guidance on design interfaces, supplier scope, installation quality, performance checks, maintenance access, and lifecycle cost.

Aseptic Cleanrooms · Safeguarding Life Sciences

Biopharmaceuticals and Life Sciences

Clean Cooling · Protecting Digital Cores

Food‑Grade Cleanrooms · Preserve Freshness & Safety